Easy Operation Plastic Pipe Extruder Machine HDPE Pipe Single Screw
Easy operation BLSJ-120*30:1 Single-screw insulation pipe
production line extruder machine plastic extruder machine
Vacuum sizing is one of the main methods of plastic pipe setting.
There are two purposes of vacuum sizing: one is to obtain the exact
size; the other is to make the plastic along the inner wall of the
sizing sleeve. By establishing the pressure difference between the
inner cavity and the wall of the tube, the outer surface of the
tube is adsorbed on the fixed diameter sleeve, and the outer
diameter and wall thickness are obtained.
I, the host
1, the screw and cylinder of 120 x 30:1, material 38CrMoALA, depth
of 0.4-0.7, brittleness is less than two.
2, toothedsurfacereducer, made of high strength alloy steel
material, gear after carburizing and quenching, grinding process.
The machine has the characteristics of small size, high carrying
capacity, stable transmission, low noise, high efficiency and so
3, frequency conversion motor: power 110KW
4, cooling fan: 6 section 250W
5, ceramic heater: 6 section 50KW
6, automatic feeding machine: BL-300
7, drying machine
8, temperature sensor, temperature controller, automatic
9, the original CHINT, Delixi electrical appliances.
II, head of the 420 body: a material by 40Gr, the exquisite high
III, setting the water jacket material: high quality brass,
specifications: (phi 250-800)
IV, vacuum setting box
1, vacuum molding box: material for stainless steel, length of 6
3, built-in stainless steel pipe: 8 pipes, water pipe is provided
with a multi ABS nozzle, more fully cooling.
4, horizontal centrifugal pump: 4KW 2
5, vacuum pump: 5.5KW 1, 4KW 1
6, before and after the mobile device: 4KW planetary gear reducer 1
V, cooling box
1, water tank: material for stainless steel.
2, cooling box length of 5 meters 1 sets
Built in 3, 6 water pipes, water pipe is provided with a multi ABS
nozzle, fully cooling products.
4, horizontal centrifugal pump: 4KW 1
VI, water system
1, wind ring
2, ball valve
3, change to blow mouth
VII, traction machine
1, traction inverter motor power: 7.5KW
2, clamping motor: 2.2KW
8, 3 groups of traction claw.
4, universal joint transmission
5, electric locking; sliding block to support the block frame, so
that it moves up and down, complete lock, loosen
6, traction line speed 0.35-1.5m/min
7, traction diameter range: Phi 300- Phi 600
8, traction machine center high 1100mm.
VIII, planetary cutting machine
1, cutting motor 3KW.
2, a revolution motor 4W
3, cutter hydraulic control
4, fan 370W
5, cutting blade of 180 * 2.2 * 60T
6, milling cutter characteristics
7, the cutting range: Phi 250- Phi 800
IX, sports car
1. good service
2. good extrusion ability
3. good product application
4. power saving
5. easy operation
1, pure water, drinking water pipeline;
2, industrial water and chemical transport, emissions;
3, domestic hot and cold water pipe system;
4, beverage, drug delivery systems of production;
5, compressed air pipe;
6, other industrial, agricultural management
1. How do I know which is the right machine for me?
Just tell me what kind of product you want to make, and I will give
suggestions according to it.
2. How do I know the output range?
I will need size information (length, width, height) to calculate
the weight of the product. And give suggestions due to the products
3. How to get more information about the machine ?
Contact information is displayed below. I would give the answers